Техническая Спецификация для Atmel Xplained Pro Evaluation Kit ATSAMD20-XPRO ATSAMD20-XPRO

23

Atmel | SMART SAM D20 [DATASHEET]

Atmel-42129K–SAM-D20_datasheet–06/2014

The NVM Software Calibration Area contains calibration data that are measured and written during production test. 
These calibration values should be read by the application software and written back to the corresponding register.

The NVM Software Calibration Area can be read at address 0x806020.

The NVM Software Calibration Area can not be written.

Each device has a unique 128-bit serial number which is a concatenation of four 32-bit words contained at the following 
addresses:

Word 0: 0x0080A00C

Word 1: 0x0080A040

Word 2: 0x0080A044

Word 3: 0x0080A048

The uniqueness of the serial number is guaranteed only when using all 128 bits.

2:0

Reserved

14:3

Reserved

26:15

Reserved

34:27

ADC LINEARITY

ADC Linearity Calibration. Should be written to 

 register.

37:35

ADC BIASCAL

ADC Bias Calibration. Should be written to 

 register.

44:38

OSC32K CAL

OSC32KCalibration. Should be written to 

 register.

57:45

Reserved

63:58

DFLL48M COARSE CAL

DFLL48M Coarse calibration value. Should be written to the 

 

register.

73:64

DFLL48M FINE CAL

DFLL48M Fine calibration value. Should be written to the 

 register.

127:74

Reserved