Техническая Спецификация для Atmel Xplained Pro Evaluation Kit ATSAMD20-XPRO ATSAMD20-XPRO
Модели
ATSAMD20-XPRO
423
Atmel | SMART SAM D20 [DATASHEET]
Atmel-42129K–SAM-D20_datasheet–06/2014
26.8.2.2 Control B
Name:
CTRLB
Offset:
0x04
Reset:
0x00000000
Property:
Write-Protected, Enable-Protected, Write-Synchronized
z
Bits 31:19 – Reserved
These bits are unused and reserved for future use. For compatibility with future devices, always write these bits to
zero when this register is written. These bits will always return zero when read.
These bits are unused and reserved for future use. For compatibility with future devices, always write these bits to
zero when this register is written. These bits will always return zero when read.
z
Bit 18 – ACKACT: Acknowledge Action
The Acknowledge Action (ACKACT) bit defines the I
The Acknowledge Action (ACKACT) bit defines the I
2
C master's acknowledge behavior after a data byte is
received from the I
2
C slave. The acknowledge action is executed when a command is written to CTRLB.CMD, or if
smart mode is enabled (CTRLB.SMEN is written to one), when DATA.DATA is read.
0: Send ACK.
1: Send NACK.
This bit is not enable-protected.
This bit is not write-synchronized.
z
Bits 17:16 – CMD[1:0]: Command
Writing the Command bits (CMD) triggers the master operation as defined in
Writing the Command bits (CMD) triggers the master operation as defined in
. The CMD bits are strobe
bits, and always read as zero. The acknowledge action is only valid in master read mode. In master write mode, a
command will only result in a repeated start or stop condition. The CTRLB.ACKACT bit and the CMD bits can be
written at the same time, and then the acknowledge action will be updated before the command is triggered.
command will only result in a repeated start or stop condition. The CTRLB.ACKACT bit and the CMD bits can be
written at the same time, and then the acknowledge action will be updated before the command is triggered.
Bit
31
30
29
28
27
26
25
24
Access
R
R
R
R
R
R
R
R
Reset
0
0
0
0
0
0
0
0
Bit
23
22
21
20
19
18
17
16
ACKACT
CMD[1:0]
Access
R
R
R
R
R
R/W
R/W
R/W
Reset
0
0
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
QCEN
SMEN
Access
R
R
R
R
R
R
R
R/W
Reset
0
0
0
0
0
0
0
0
Bit
7
6
5
4
3
2
1
0
Access
R
R
R
R
R
R
R
R
Reset
0
0
0
0
0
0
0
0