Техническая Спецификация для Mikroelektronika MikroE Development Kits MIKROE-1431

1. Introduction

Once you have soldered the headers your 
board is ready to be placed into desired 
mikroBUS™ socket. Make sure to align the 
cut in the lower-right part of the board 
with the markings on the silkscreen at the 
mikroBUS™ socket. If all of the pins are 

aligned correctly, push the board all 

the way into the socket.

3. Plugging the board in

2

3

2. Soldering the headers

1

4. Essential features

Turn the board upward again. Make sure 
to align the headers so that they are 
perpendicular to the board, then solder the 
pins carefully.

Turn the board upside down so that 
bottom side is facing you upwards. Place 
shorter parts of the header pins in both 
soldering pad locations.

Before using your click board™, make sure 
to solder 1x8 male headers to both left 
and right side of the board. Two 1x8 male 
headers are included with the board in 
the package.

click

BOARD

www.mikroe.com

FM click Manual

0 100000 023785

FM Click

™

 is an accessory board in 

™

 form factor. It’s a compact and 

easy solution for adding broadcast FM radio 
tuner to your design. It features 

 FM 

radio tuner, two 

audio amplifiers 

as well as stereo audio connector. FM 
Click

™

 communicates with the target board 

microcontroller via 

™ 

I

2

C (SDA, 

SCL), INT, RST, CS and AN lines. The board 
is designed to use 3.3V power supply only. 
LED diode (GREEN) indicates the presence 
of power supply.

FM 

click

FM Click™ with it’s 

IC is a complete 

FM radio tuner (from antenna input to stereo 
audio output). It supports worldwide FM 
band (76 – 108 MHz). The board contains 
automatic frequency and gain control, RDS/
RBDS processor, seek tuning and volume 
control. All these features make this board 
ideal for MP3 players, portable radios, PDAs, 
notebook PCs, portable navigations and 
many more.