Техническая Спецификация для Mikroelektronika MikroE Development Kits MIKROE-1120
Модели
MIKROE-1120
Page 1 of 4
Shenzhen Shirui Battery Co., Ltd MSDS No: 201401-01A
Product Name: Lithium Ion Battery Cell
Issued and Revised Date: 1-January -2014
1. PRODUCT AND COMPANY IDENTIFICATION
Product Name: Lithium ion battery
SR674361P 3.7V 2000mAh 7.4Wh
SR674361P 3.7V 2000mAh 7.4Wh
Supplier Identification:
Shenzhen Shirui Battery Co., Ltd.
ShuiweiRoad 25#, Xingmu country, Pinghu town, Shenzhen city
,China
TEL: 86-755-61201160 FAX: 86-755-61201296
Contact Point:
Contact Point:
Shenzhen Shirui Battery Co., Ltd.
ShuiweiRoad 25#, Xingmu country, Pinghu town, Shenzhen city
,China
TEL: 86-755-61201160 FAX: 86-755-6120129
Http://www.srbattery.com.cn E-mail:wzhui316@163.com
2. COMPOSITION / INFORMATION ON INGREDIENTS
Information about the chemical nature of product:
Ingredient Name
CAS No.
Concentration
ACGIH-TLV
☆
OSHA PEL
Lithium Cobalt Dioxide
12190-79-3
30-40 %
——
——
Graphite (various Carbons)
7782-42-5
15-21 %
——
——
Organic electrolyte
―
10-18 %
——
——
Lithium hexafluorophoshate
21324-40-3
1.5-3 %
——
——
Non-Hazardous Ingredients
―
18-40%
——
——
3. Independent Certification of Lithium-Ion cell UN Transportation Model Regulation
No
Test Item
Criteria
Result
Remark
T1
Altitude
Simulation
Simulation
No mass loss,leakage,venting,disassembly,rupture,and fire.
OCV should not be less than 90% before testing.
OCV should not be less than 90% before testing.
Passed
T2
Thermal
Test
Test
No mass loss,leakage,venting,disassembly,rupture,and fire.
OCV should not be less than 90% before testing.
OCV should not be less than 90% before testing.
Passed
T3 Vibration
No mass loss,leakage,venting,disassembly,rupture,and fire.
OCV should not be less than 90% before testing.
OCV should not be less than 90% before testing.
Passed
T4 Shock
No mass loss,leakage,venting,disassembly,rupture,and fire.
OCV should not be less than 91% before testing.
OCV should not be less than 91% before testing.
Passed
T5
External
Short Circuit
Short Circuit
External temperature should not exceed 170 degC.
No disassembly,rupture,and fire within six hours of this test.
No disassembly,rupture,and fire within six hours of this test.
Passed
T6 Impact
External temperature should not exceed 170 degC.
No disassembly,and fire within six hours of this test.
No disassembly,and fire within six hours of this test.
Passed
4. PHYSICAL /CHEMICAL CHARACTERISTICS:
Specific Gravity :LiCoO2:3.80 Graphite:2.0~2.2 (H2O=1)
Melting Point: LiCoO2:1130℃
MATERIAL SAFETY DATA SHEET