Техническая Спецификация для Mikroelektronika MikroE Development Kits MIKROE-326

MikroElektronika

The ADC PROTO additional board is used to convert analog voltage signals into digital voltage signals in 12-bit resolution. The 

converted voltage signal is sent to a microcontroller via the Serial Peripheral Interface (SPI).

 

- 4 A/D input channels;

 

- A/D conversion in 12-bit resolution;

 

- power supply voltage ranges from 2.7 to 5.5V; and

 

- capable of connecting with various development systems via proto board.

The ADC PROTO additional board is connected to a development system via the proto board, Figure 4. Connection between the 

additional and proto boards is established via the 1x6 connector CN1 provided on the additional board. A voltage signal to be converted 

is supplied via two screw connectors CN2 and CN3. Figure 3 shows the way of providing voltage signal for A/D conversion to the CH0 

and CH1 channels.

Figure 1: ADC PROTO additional board

Figure 2: The back side of the additional board 

Screw connectors

1x6 connector

Figure 3: Additional board connected with PROTO board

  Digital and analog voltage signals have the common Ground.