Техническая Спецификация для Olimex Open Source Hardware Embedded ARM Linux Single board computer with i.MX233 ARM926J @454Mhz IMX233-OLINUXINO-MAXI IMX233-OLINUXINO-MAXI
Модели
IMX233-OLINUXINO-MAXI
OLIMEX© 2012
OLinuXino-MAXI user's manual
6.12 Jumper description
Please note that all the jumpers on the board are SMD type. If you feel insecure of your
soldering/cutting technique it is better not to try to adjust the jumpers.
soldering/cutting technique it is better not to try to adjust the jumpers.
6.12.1 SCL_SW/SCL_HW and SDA_SW/SDA_HW
Those two jumpers must be moved together – there are two available options – configuring
software I2C interface (SCL_SW, SDA_SW) or hardware I2C interface (SCL_HW, SDA_HW
positions).
software I2C interface (SCL_SW, SDA_SW) or hardware I2C interface (SCL_HW, SDA_HW
positions).
Jumpers are set to SCL_HW and SDA_HW by default. This defines hardware I2C.
Page 46 of 60