Справочник Пользователя для Olimex Open Source Hardware ARDUINO-like development board OLIMEXINO-5510 OLIMEXINO-5510
Модели
OLIMEXINO-5510
OLIMEX© 2012
OLIMEXINO-5510 User's Manual
CHAPTER 1: OVERVIEW
1. Introduction to the chapter
Thank you for choosing the OLIMEXINO-5510 development board from Olimex! This document
provides a user’s guide for the Olimex OLIMEXINO-5510 board. As an overview, this chapter
gives the scope of this document and lists the board’s features. The document’s organization is then
detailed.
provides a user’s guide for the Olimex OLIMEXINO-5510 board. As an overview, this chapter
gives the scope of this document and lists the board’s features. The document’s organization is then
detailed.
The OLIMEXINO-5510 development board enables code development of applications running on
the microcontroller MSP430F5510, manufactured by Texas Instruments.
the microcontroller MSP430F5510, manufactured by Texas Instruments.
1.1 Features
MCU: MSP430F5510 with 32K Bytes Program Flash, 4K Bytes RAM, 25Mhz
Power supply circuit
Power-on led
Li-Po battery connector
Li-Po battery recharge circuit
RTC (Real-time clock) quartz crystal
UEXT connector
User LED
SBW interface
User button, boot button and RESET button
Reset button
FR-4, 1.5 mm, soldermask, component print
Dimensions: 53.3mm x 55.9mm (2.1'' x 2.2")
1.2 Target market and purpose of the board
OLIMEXINO-5510 is intended to work with Energia - an Arduino-like IDE for MSP430. The
community is working on adding full support for Energia. At the time of writing this manual such
support isn't fully added but it is on the way. When such support is implemented there will be
software examples below in Energia format.
community is working on adding full support for Energia. At the time of writing this manual such
support isn't fully added but it is on the way. When such support is implemented there will be
software examples below in Energia format.
OLIMEXINO-5510 was specially designed for the EasyMSP project which is created by Matthew
Page 5 of 29