Справочник Пользователя для Olimex Open Source Hardware Industrial grade ARDUINO like development board OLIMEXINO-328 OLIMEXINO-328
Модели
OLIMEXINO-328
OLIMEX© 2013
OLIMEXINO-328 user's manual
7.3 Useful web links and purchase codes
The web page you can visit for more info on your device is
For more info on the original Arduino design please visit:
ORDER CODES:
OLIMEXINO-328 - assembled and tested Arduino-like board
AVR-ISP500 – assembled and tested AVR-ISP compatible programmer
AVR-ISP-MK2 – assembled and tested AVR-ISP compatible programmer
How to purchase Olimex products?
You can order from our web-shop or from any of our distributors. The list of official Olimex
distributors might be found at:
You can order from our web-shop or from any of our distributors. The list of official Olimex
distributors might be found at:
for more info.
7.4 FAQ
Q1: I installed the OLIMEXINO-328 drivers. The board shows in “Windows Device
Manager” correctly. Yet, the board cannot be programmed in Arduino IDE?
Manager” correctly. Yet, the board cannot be programmed in Arduino IDE?
A1. Try installing older FTDI drivers. FTDI drivers 2.08.14 or earlier should fix the issue. The
problem with the FTDI drivers is described in this forum post:
problem with the FTDI drivers is described in this forum post:
Q2: I have OLIMEXINO-328 and Olimex AVR-ISP-MK2. The drivers seem correct, yet I'm
unable to program the board. What might be causing the problem?
A2: Very often people try to use the PDI or TPI interface of AVR-ISP-MK2 for the ICSP slot of
OLIMEXINO-328. Please, use jumper wires to transform the 10-pin ICSP of the AVR-ISP-MK2 to
6-pin ICSP connector of the OLIMEXINO-328.
unable to program the board. What might be causing the problem?
A2: Very often people try to use the PDI or TPI interface of AVR-ISP-MK2 for the ICSP slot of
OLIMEXINO-328. Please, use jumper wires to transform the 10-pin ICSP of the AVR-ISP-MK2 to
6-pin ICSP connector of the OLIMEXINO-328.
Page 22 of 23