Техническая Спецификация для Conrad Energy remote control ARF 2320 mm FMS023

The model must be adjusted by skilful placement (2) of the flight battery (1) so that the centre of gravity is approx. 

40 mm behind the front side of the wing (the addition of trimming lead should be avoided), see figures 9 and 10.
To do so, mark the corresponding centre of gravity position at the bottom of the wing with a pen (figure 10). From the 

bottom, hold the assembled and ready-to-fly model at the measured positions with your index fingers (or a corres-

ponding device). If the centre of gravity is set correctly, the model should be leaning slightly forward.

 

Measure the centre of gravity only with the model completely ready for flight (inserted flight battery, applied 

cabin hood, etc.).