Техническая Спецификация для Conrad Energy RtF 900 mm FMS064
Модели
FMS064
58
12. Installing the Wings
Figure 8
Plug the two servo cables of the aileron servos into the corresponding sockets from the receiver (1). Observe proper
polarity (colour coding of the cables).
Push the wing into the indentation at the front of the fuselage with the latching tab (2).
Place the rear edge of the wing flat onto the fuselage. Observe that no cables are crushed.
Attach the wing to the fuselage with two screws 2.6 x 30 mm (3).
Push the wing into the indentation at the front of the fuselage with the latching tab (2).
Place the rear edge of the wing flat onto the fuselage. Observe that no cables are crushed.
Attach the wing to the fuselage with two screws 2.6 x 30 mm (3).