Справочник Пользователя для Reely 1:6 RC model car Petrol Buggy FS10803





The camber is the inclination of the wheel level as compared to the vertical.

Negative inclination

Positive inclination

(Top wheel edge points inwards)

(Top wheel edge points outwards)

The setting of the wheel is exaggerated in the two figures in order to make the difference between nega-
tive and positive cambers more obvious. The setting on the model vehicle should of course not be as
extreme as shown!

• A negative inclination of the front wheels increases the lateral cornering powers of the wheel when driving through

bends, the steering reacts more directly and steering forces are reduced. At the same time, the wheel is pushed onto
the axle leg in the direction of the axle. This balances out axial bearing clearance, the driving behaviour is calmer.

• A negative inclination of the rear wheels reduces the tendency of the rear of the vehicle to swerve in bends.

• Setting a positive camber on the other hand reduces the cornering force of the wheels and should not be used.

For setting the camber, turn the screw (1) of the upper
transverse link.

Because this screw has a left and right hand thread at
either end, the transverse link does not need to be
dismantled for the camber to be adjusted.