Справочник Пользователя для Reely Brushed 1:10 RC model car Electric Buggy QCO10E4W000EV61R02

The manual for the remote control system is included separately. Always observe all safety information
included in it as well as any other information!

• Only use suitable drive batteries for the vehicle. Never operate the speed controller with a mains adapter, not even

for test purposes.

This vehicle is exclusively suitable for use with NiMH rechargeable batteries with 6 cells (rated voltage
7.2 V).

When using a drive battery with more cells, there is a danger of fire from overheating of the speed controller.
Apart from this, the vehicle’s drive will be overloaded and damaged by this (e.g. differential). Loss of
guarantee/warranty!

The speed controller installed in the vehicle can generally also be operated with a 2-cell LiPo battery
(rated voltage of the drive battery 7.4 V), but it has no undervoltage recognition function! This may lead to
deep discharge of the LiPo battery and damage it.

• Always switch on the transmitter first when taking the vehicle into operation. Only then must the vehicle’s drive

battery be connected with the speed controller and the speed controller switched on. Otherwise, the vehicle may
show unpredictable responses!

Place the vehicle on an appropriate support before connecting the drive battery so that the wheels can
turn freely.

Check the position of the on/off switch of the speed controller and place it in the „OFF“ position (switched
off).

Switch on the transmitter if you haven’t done it already. Check its function (e.g. operation display of the
transmitter).

Put the trimming for the throttle/brake function at the transmitter into the centre position.

Now connect a fully charged drive battery to the speed controller. As described above already, only a
NiMH drive battery with 6 cells (rated voltage 7.2 V) must be used.

Hold the vehicle, but do not reach into the drive unit. There is a risk of serious injury! Never hold the vehicle
by its wheels!

Only then switch on the speed controller (switch position e.g. labelled „ON“).

• Check that the vehicle reacts to remote control commands as expected (steering and drive) before taking it from the

support and placing it on the ground with its wheels.

• Improper operation may cause serious injury and property damage! Only drive with the model directly in view. This

is why you shouldn’t drive at night.

• Only drive when your ability to react is unrestricted. Exhaustion or the influence of alcohol or medication can cause

incorrect responses, just as with real vehicles.

• Please note that this model vehicle must not be driven on public roads, places or streets. Also do not operate it on

private grounds without the owner’s permission.