Техническая Спецификация для Reely Brushless 1:8 RC model car Electric Buggy GSC3510

To stop driving, proceed as follows:
•  Let go of the throttle/brake lever on the transmitter so that it goes into neutral position, and let the vehicle run out.
•  Once the vehicle is stationary, remove the car body and switch off the speed controller (switch position „OFF“, see

figure chapter 9. e). Never touch the wheels or the drive mechanism, and make sure you do not move the throttle/

brake lever at the transmitter! Do not hold the vehicle at its wheels!

 

The motor, the speed controller and the drive battery get hot during operation! Do not touch these parts 

immediately after operation. Danger of burns!

•  Disconnect the drive battery from the speed controller. Disconnect the plug-in connection completely.
•  Now you may turn off the transmitter.