Техническая Спецификация для Reely RC model helicopter RtF 150 1195426

 In the further course of these instructions, figures in the text always refer to the adjacent figure or the figures

within the section. References to other figures are indicated with the corresponding figure number.

The power supply of the transmitter requires 4 AA/mignon batteries (e.g. Conrad Item No.: 652506, order 4x). 

 

Use batteries only (1.5 V/cell) instead of rechargeable batteries (1.2 V/cell) for transmitter power supply. 

Proceed as follows to insert the batteries:
Lift the battery compartment lid (see figure 2, item 24) at the

lower edge and fold it up.
Insert four type AA/mignon batteries with correct polarity (ob-

serve  plus/+  and  minus/-)  according  to  the  specifications  at

the bottom of the battery compartment (1). The spiral-shaped 

spring contact (2) always must be connected to the minus pole 

of the battery (3).
Fold down the battery compartment lid and let it latch.

Move the control stick for the pitch and tail functions (also see 

figure 1, item 17) to the bottom position right at your body.
Check the position of the toggle switches. All switches should 

be in the forward or bottom positions (see arrows in the figure

on the right).
Slide the on/off switch (also see figure 1, item 7) from the lower

switch position (off) up to the position (on).