Справочник Пользователя для Olympus SP-550UZ 006877*

Модели
006877*
Скачать
Страница из 96
EN   
69
Gett
ing 
to
 kn
ow yo
ur ca
mera 
bet
te
r
When you get an error message on the camera
Monitor indication
Possible cause
Corrective action
q
CARD ERROR
There is a problem with the 
card.
This card cannot be used. Insert a new 
card.
q
WRITE-PROTECT
Writing to the card is 
prohibited.
The recorded image has been protected 
(read-only) on a computer. Download the 
image to a computer and cancel the read-
only setting.
>
MEMORY FULL
The internal memory has no 
available memory and 
cannot store any new data.
Insert a card or erase unwanted data. 
Before erasing, backup the data of 
important pictures onto the card, or 
download such pictures to a computer.
q
CARD FULL
The card has no available 
memory and cannot store 
any new data.
Replace the card or erase unwanted data. 
Before erasing, download important 
pictures to a computer.
L
NO PICTURE
There are no pictures in the 
internal memory or on the 
card.
The internal memory or the card contains 
no pictures.
Record pictures.
r
PICTURE ERROR
There is a problem with the 
selected picture and it 
cannot be played back on 
this camera.
Use image processing software to view the 
picture on a computer. If that cannot be 
done, the image file is damaged.
r
THE IMAGE CANNOT 
BE EDITED
If pictures taken by other 
cameras are selected, they 
cannot be edited.
Use image processing software to edit the 
pictures.
CARD-COVER OPEN
The card cover is open.
Close the card cover.
g
BATTERY EMPTY
The battery is empty.
Insert new batteries. When using 
rechargable batteries, charge the 
batteries.
Recording has 
stopped to allow 
camera to cool.
Please wait a 
moment.
When [IMAGE STABILIZER] 
is set to [ON], the camera's 
internal temperature rises 
due to continuous movie 
recording for a long period, 
thereby causing shooting to 
stop.
Allow the camera to cool down for some 
time before you begin shooting again. Or 
you can shoot with [IMAGE STABILIZER] 
set to [OFF].
Camera is cooling.
Please wait a 
moment.
This card cannot be used in 
this camera. Or, the card is 
not formatted.
Format the card or replace.
• Select [POWER OFF] and press 
o. 
Insert a new card.
• Select [FORMAT][YES] and press 
o. All data on the card is erased.
OK
SET
C A R D   S E T U P
POWER OFF
FORMAT
[ x D ]