Техническая Спецификация для Steinberg WAVELAB 8.5 RETAIL SOFTWARE 45370
Модели
45370
Offline Processing
Pan Normalizer Dialog
190
Maximum number of passes
WaveLab performs as many analysis passes as needed to match the
precision that you want to achieve. Use this option to specify the maximum
number of passes to be performed.
precision that you want to achieve. Use this option to specify the maximum
number of passes to be performed.
Authorized peak compression
As too much compression degrades the audio quality, you can specify a limit
for the applied compression. The value can be set between -1 and -20 dB.
Consider to lower the Loudness to achieve, as this renders better results.
for the applied compression. The value can be set between -1 and -20 dB.
Consider to lower the Loudness to achieve, as this renders better results.
Warn if unmatched
If this option is activated, you are warned if the normalizing process does not
meet the specified loudness/precision. This option is not available during
batch processing.
meet the specified loudness/precision. This option is not available during
batch processing.
Statistics
Opens a window which shows you information about the file to be processed.
It shows any DC offset, the current loudness, the current peak level, and the
required gain to achieve the specified loudness. Furthermore you are informed
if limiting is required.
It shows any DC offset, the current loudness, the current peak level, and the
required gain to achieve the specified loudness. Furthermore you are informed
if limiting is required.
R
ELATED
LINKS
Pan Normalizer Dialog
This dialog allows you to ensure that both channels of a stereo file have the same
level or loudness, and helps you to get the best possible stereo balance.
level or loudness, and helps you to get the best possible stereo balance.
In the Audio Files workspace, select Process > Pan Normalizer.
This dialog is also available as a multipass plug-in in the Batch Processors
workspace.
workspace.
This process first analyzes the audio and then renders any required level changes.
You must have a stereo selection in a stereo file to apply this process.
You must have a stereo selection in a stereo file to apply this process.
Peak level
Raises the channel with the lowest peak level to match the peak level of the
other channel.
other channel.