Техническая Спецификация для Siemens SPS starter kit 6ED1057-3BA00-0AA8 12 Vdc, 24 Vdc 6ED1057-3BA00-0AA8
Модели
6ED1057-3BA00-0AA8
LOGO!Soft Comfort V8.0
1.4 What's new in LOGO!Soft Comfort?
LOGO!Soft Comfort Online Help
Operating Instructions, 06/2014
Operating Instructions, 06/2014
19
New LOGO! expansion module
One new LOGO! expansion module is commercially available:
● LOGO! AM2 RTD
This expansion module is equipped with two analog inputs for connection to PT100 and/or
● LOGO! AM2 RTD
This expansion module is equipped with two analog inputs for connection to PT100 and/or
PT1000 sensors with the default temperature coefficient of α = 0.003850 for both sensor
types. It can automatically recognize the sensor type, thus it is unnecessary for you to make
any configuration or setting to achieve this.
For detailed information about this expansion module, refer to your product information and
For detailed information about this expansion module, refer to your product information and
the
LOGO! Manual
.
New features
LOGO!Soft Comfort together with the LOGO! 0BA6 hardware series provides the following
new features:
● Method to delete user program and password from LOGO! 0BA6
● Additional languages, resolution, and backlight function for the LOGO! 0BA6 onboard
● Method to delete user program and password from LOGO! 0BA6
● Additional languages, resolution, and backlight function for the LOGO! 0BA6 onboard
display
● Ability to perform online tests of LAD circuit programs
● Display of PI controller analog output value in a trend view during simulation or online test
● Modem communication between a PC and LOGO! 0BA6
● USB cable communication between a PC and LOGO! Base Module
● New memory card, battery card and combined memory/battery card for LOGO! 0BA6
● Display of PI controller analog output value in a trend view during simulation or online test
● Modem communication between a PC and LOGO! 0BA6
● USB cable communication between a PC and LOGO! Base Module
● New memory card, battery card and combined memory/battery card for LOGO! 0BA6
devices.
Changed functionality
LOGO!Soft Comfort provides changes in the following areas:
● Number of user program blocks increased to 200 blocks
● Additional retentive memory for a total of 250 bytes
● Configuration support for all I/O changes to LOGO! Base Modules and expansion
● Number of user program blocks increased to 200 blocks
● Additional retentive memory for a total of 250 bytes
● Configuration support for all I/O changes to LOGO! Base Modules and expansion
modules
Prior versions
For information about features that were new in versions prior to LOGO!Soft Comfort V6.1,
refer to the documentation for earlier versions. Current and previous documentation can be
found at the LOGO! Internet Web site (Page 21).