Техническая Спецификация для Siemens SPS starter kit 6ED1057-3BA00-0AA8 12 Vdc, 24 Vdc 6ED1057-3BA00-0AA8
Модели
6ED1057-3BA00-0AA8
Using memory cards
9.4 Copying data from the card to LOGO!
LOGO!
Manual, 06/2014, A5E33039675
Manual, 06/2014, A5E33039675
277
3. Switch on the power supply to LOGO!.
LOGO! copies the program from the program module/card to LOGO!. When LOGO!
finishes copying, it opens the LOGO! main menu:
Note
Before you switch LOGO! to RUN, you must ensure that the system you are controlling
Before you switch LOGO! to RUN, you must ensure that the system you are controlling
with LOGO! does not represent a source of hazard.
4. Move the cursor to the first menu command in Step 3: Press or .
5. Press OK.
5. Press OK.
Copying by means of the card specific menu
For more information about the replacement of a micro SD card, refer to Section "Inserting
To copy a program from the card to LOGO!, insert the card and follow the steps shown in the
illustration below:
Press OK. LOGO! copies the circuit program from the card to LOGO!. When LOGO! has
finished copying, it automatically returns to the LOGO! main menu.