Техническая Спецификация для Siemens SPS starter kit 6ED1057-3BA00-0AA8 12 Vdc, 24 Vdc 6ED1057-3BA00-0AA8
Модели
6ED1057-3BA00-0AA8
Programming LOGO!
3.9 Memory space and circuit program size
LOGO!
Manual, 06/2014, A5E33039675
Manual, 06/2014, A5E33039675
109
5. To enter an IP address, Press OK. When the cursor appears in a flashing solid square,
press or to move the cursor to a position where you want to modify the number, then
press or to increase or decrease the number.
6. Press OK to confirm your input.
LOGO! stores up to four addresses that you entered previously. To view your last inputs,
press to move the cursor to the " " symbol, and then press OK to open a drop-down
list, for example:
You can press or to select a previously configured address in the list, and then press
OK to comfirm.
Toggling an error alert
You can enable/disable an error alert by following these steps:
1. In the diagnostic menu shown below, move the cursor to "
1. In the diagnostic menu shown below, move the cursor to "
①
": Press or
2. Confirm "
①
": Press OK
3. The circle with a dot indicates the current setting. To change the setting: Press or
4. Confirm your selection: Press OK. LOGO! returns to the previous view.
If you enable the error alert, when an error occurs, the LOGO! display turns to red backlight,
If you enable the error alert, when an error occurs, the LOGO! display turns to red backlight,
reminding you that LOGO! detects an error. You can go to the diagnostics menu to view and
clear the error.
3.9
Memory space and circuit program size
The size of a circuit program in LOGO! is limited by the memory space.
Memory areas
● Program memory:
LOGO! allows only a limited number of blocks in your circuit program.