Техническая Спецификация для ConiuGo 700100140
32
9. Use of the GPRS function
To use the GPRS function of the modem you have to do some important steps.
Please note that you can use the GPRS function only in combination with a Windows
based system!
9.1 Installation of the Motorola GPRS Manager
10.
Start the file „SETUP.EXE“ from the installation CD.
11. The Motorola GPRS Manager will now be installed.
12. Double click the double arrow until you could see the coice of the language.
After choice you have to click the double arrow again until you have
reached the main installation. If necessary change the installation path or
accept the predefined installation path.
13. The question to restart the computer you have to answer with NO.
9.2 Transmit the PIN number
1. Basicly:
the simplest way is therefore, to put the SIM card into a mobile phone, to
choose the security settings and to deactivate the PIN number.
2. In case of security reasons some provider does not support that way. For
this case you have to follow the following instructions. With the software
HyperTerminal the PIN number has to be transmitted every time after start
up the modem:
3.
Start „HyperTerminal“ with „Start/Programms/Further/Communication/... and
create a new connection. If „HyperTerminal“ is not installed on your system,
you have to add the software with the followings settings over the windows
installation CD: „Settings/System/Software..“.
create a new connection. If „HyperTerminal“ is not installed on your system,
you have to add the software with the followings settings over the windows
installation CD: „Settings/System/Software..“.
4. You could create a new connection. Then you have to name it when you
have star
ted („Start/Programme/Zubehör/Kommunikation) the software e.g.
(GPRS Modem COM7). In the next window you choose the option on the
bottom „Connect over/with” and set COM Port (e.g. COM7) you get under
bottom „Connect over/with” and set COM Port (e.g. COM7) you get under