Техническая Спецификация для Weidmueller Weidmüller 1616440000 Terminal Block 7.9mm 1616440000
Модели
1616440000
Datenblatt
Z terminal with electronic components
ZSI 2.5/LD 28AC
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technische Daten
Erstellungs-Datum January 13, 2014 2:30:08 PM CET
Katalogstand xx.xx.xxxx / Technische Änderungen vorbehalten
2
Dimensions and weights
Length
79.5 mm
Width
7.9 mm
Height
73 mm
Height of lowest version
74 mm
Net weight
19.63 g
Temperatures
Operating temperature
Storage temperature
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
120 °C
Additional technical data
Explosion-tested version
No
Installation advice
Direct mounting
Number of similar terminals
1
Open sides
right
Type of mounting
Snap-on
Version
Tension-clamp connection,
Fuse cartridge, with
LED, for plug-in cross-
connector, One end
without connector
CSA ratings data
Certificate No. (CSA)
200039-1152892
Wire cross section max. (CSA)
12 AWG
Wire cross section min. (CSA)
26 AWG
Clampable wires (additional connection)
Conductor cross-section, flexible plus
plastic collar DIN 46228/1, further
connection, min.
0.5 mm²
Conductor cross-section, flexible plus
plastic collar DIN 46228/1, further
connection, max.
2.5 mm²
Clampable wires (rated connection)
Type of connection
Tension clamp connection Stripping length
10 mm
Blade size
0.6 x 3.5 mm
Connection direction
Inclined / angled
Number of connections
2
Clamping range, rated connection, min. 0.13 mm²
Clamping range, rated connection, max. 4 mm²
Gauge to IEC 60947-1
A3
Wire connection cross section, solid
core, max. rated connection
0.5 mm²
Wire connection cross section, solid
core max. rated connection
4 mm²
Wire connection cross section, finely
stranded, max.
4 mm²
Wire connection cross-section, finely
stranded, min.
0.5 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, min.
0.5 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, max.
2.5 mm²
Cross-section for connected conductor,
finely stranded with wire-end ferrules
and plastic collars DIN 46228/4, rated
connection, min.
0.5 mm²
Wire connection cross-section, finely
stranded with wire-end ferrules and
plastic collars DIN 46228/4, rated
connection, max.
2.5 mm²
Wire connection cross section AWG,
min.
AWG 26
Wire connection cross section AWG,
max.
AWG 12
Rated data
Rated cross-section
2.5 mm²
Rated impulse withstand voltage
6 kV
Rated current
6.3 A
Current at maximum wires
6.3 A
Standards
IEC 60947-7-3
Pollution severity
3