Техническая Спецификация для Solar Trend 03100
Instruction Manual
LED Flash Light Article-No. 03100
Distribution by Süd Solar GmbH, Max-Eyth-Str. 6, 71732 Tamm (Germany)
Copyright © Süd Solar GmbH, 2011. Subject to modifications.
www.sued-solar.de
Copyright © Süd Solar GmbH, 2011. Subject to modifications.
www.sued-solar.de
REV-3-19-01-12
1. Introduction
Dear customer. Thank you for purchasing one of our products.
This product corresponds to the applicable European directives and National regulations.
Conformity has been proven. Relevant declarations and documents are deposited at the manufacturer.
2. Security Advices
This product corresponds to the applicable European directives and National regulations.
Conformity has been proven. Relevant declarations and documents are deposited at the manufacturer.
2. Security Advices
For damages caused by disregard of this instruction manual, the right of guarantee expires! For further damages we do not accept any
liability! For material or personal damage which occurs because of inappropriate use or disregard of the security advices, we do not
accept any liability. In such cases any right of guarantee expires. Due to security reasons (CE) any alteration is not permitted. The
device is no toy. Keep away from children.
liability! For material or personal damage which occurs because of inappropriate use or disregard of the security advices, we do not
accept any liability. In such cases any right of guarantee expires. Due to security reasons (CE) any alteration is not permitted. The
device is no toy. Keep away from children.
3. Appropriate Use
The LED flash light is destined for indoor use.
4. Commissioning
1. Take all parts out of the packaging.
2. With the fastening aid included the LED flash light can be fixed to a suitable ground.
3. Plug the connector of the connecting cable into the socket of the LED flash light.
4. Attach the other end oft he connecting cable to a suitable d.c. source between 12 and 24 Volt.
An observance of the right polarity (+/-) is not necessary.
Pay attention to a suitable covering for the feed line of the lamp.
5. The LED flash lamp can be turned on/off via the lateral rocker switch.
6. You can also operate several LED Flash Lights in a row. A suitable, plug-in cable of 5m length is available as
accessory (Article-No. 03101).
5. Care, maintenance and malfunction
Clean the product with a clean and dry cloth. The LEDs in the flash light are maintenance-free and cannot been replaced.
6. Scope of delivery
1. 1 x LED flash light with rocker switch
2. 4 x fastening aid (2 x angled, 2 x flat)
3. 1 x connecting cable, 5m
4. 1 x Instruction Manual
2. 4 x fastening aid (2 x angled, 2 x flat)
3. 1 x connecting cable, 5m
4. 1 x Instruction Manual
7. Technical Data
Elektrical Parameters : Voltage range: 12-24 volt DC, power input approx. 0,2 bis 0,5 A
Illuminant
Illuminant
: 27 SMD-LED, white lighted
8. Warranty
Warranty services are executed by the authorized dealer where you have bought the product.
Warranty services are executed under presentation of the invoice or receipt of the product.
Warranty services are executed under presentation of the invoice or receipt of the product.
9. Disposal Advice
Disused electronic devices must not be disposed with the consumer waste. The user is engaged by
law to return these after use, for example to public collecting points or to places where such devices
are sold.
law to return these after use, for example to public collecting points or to places where such devices
are sold.