Техническая Спецификация для Buffalo TeraStation 3400r 12TB TS3400R1204-EU
Модели
TS3400R1204-EU
162
Changing the IP Address
Normally, the TeraStation’s IP address is set automatically from a DHCP server on your network. If you prefer, you can set
it manually. An easy way to do this is to change it from NAS Navigator 2 running on a computer connected to the same
router (subnet) as the TeraStation.
it manually. An easy way to do this is to change it from NAS Navigator 2 running on a computer connected to the same
router (subnet) as the TeraStation.
Notes:
• You can also change the TeraStation’s IP address from Network - IP Address in Settings.
• If the TeraStation is being used as an iSCSI hard drive, navigate to Drives - iSCSI in Settings and move the iSCSI
• You can also change the TeraStation’s IP address from Network - IP Address in Settings.
• If the TeraStation is being used as an iSCSI hard drive, navigate to Drives - iSCSI in Settings and move the iSCSI
switch to the
position temporarily before changing network settings.
1
Double-click the
icon in the Dock.
2
Right-click on your TeraStation’s icon, then choose Properties - IP Address. For Mac OS, click the TeraStation icon
while holding down the control key, then choose Configure - IP Address.
while holding down the control key, then choose Configure - IP Address.
3
Enter the desired settings, then click OK.