Техническая Спецификация для Buffalo TeraStation 3400r 12TB TS3400R1204-EU
Модели
TS3400R1204-EU
62
Notes:
• Do not unplug a drive whose status LED is green instead of red. Dismount it first or shut down the TeraStation
• Do not unplug a drive whose status LED is green instead of red. Dismount it first or shut down the TeraStation
before swapping a working drive. If you remove the drive without properly dismounting it, data may be lost or
the TeraStation may malfunction.
the TeraStation may malfunction.
• Use a Buffalo OP-HDS series drive of the same size or larger for the replacement drive. If a larger drive is used, the
extra space will not be usable in a RAID array.
• To avoid damaging the TeraStation with static electricity, ground yourself by touching something made of metal
before handling any sensitive electronic parts.
• After a drive is replaced, it takes about 30 minutes before normal file reading and writing are restored. Settings
may not be accessible during this period.
• Do not change the order of the hard drives in the TeraStation. For example, pulling out drive 1 and replacing it
with drive 2 may cause data to be corrupted or lost.
• If the LCD display does not change after a new drive is installed, click Rediscover Disk in Settings.
Hard Drive Replacement Examples
The section explains with TS3400D and TS3400R series models.
Drive Replacement (using JBOD or a redundant RAID mode such as RAID 1, 5, or 6 with
auto-shutdown disabled)
auto-shutdown disabled)
This section describes replacing a drive with
the TeraStation on
.
1
TS3400D: Open the front cover with the included key.
2
The failed drive’s status LED will be glowing red. Push its unlock button and swing the lock mechanism out.