Справочник Пользователя для Buffalo LinkStation 441D + 4x DT01ACA200 LS441DE-EU + 4X DT01ACA200
Модели
LS441DE-EU + 4X DT01ACA200
48
the drive, change the RAID mode.
For RAID 1, 5, 10
After 5 minutes, the power LED will light up amber. Navigate to Drives - RAID in Advanced Settings. Select the
array with the error, then click Recover RAID Array. Follow the procedure on the screen to complete the hard
drive replacement.
For JBOD
Navigate to Drives - Drives in Advanced Settings. Format the new drive and create a shared folder before use.
For RAID 1, 5, 10
After 5 minutes, the power LED will light up amber. Navigate to Drives - RAID in Advanced Settings. Select the
array with the error, then click Recover RAID Array. Follow the procedure on the screen to complete the hard
drive replacement.
For JBOD
Navigate to Drives - Drives in Advanced Settings. Format the new drive and create a shared folder before use.
Rebuilding the RAID Array from a Mobile Device
You can also initiate the RAID rebuild from your mobile device. Before turning off the LinkStation, determine which
hard drive has failed. The failed drive's status LED will be glowing red.
hard drive has failed. The failed drive's status LED will be glowing red.
1
Open Settings and tap the blinking red information icon.
2
Tap Recover RAID Array.