Справочное Руководство для TP-LINK TL-SG2008

 

120

 

TL-SG2008(config-mst)# revision 100 

The spanning-tree mst instance command is used to configure the priority of 

MST instance. To return to the default value of MST instance priority, please use 

no spanning-tree mst instance command. 

no spanning-tree mst instance instance-id priority 

instance-id —— Instance ID, ranging from 1 to 8. 

pri —— MSTI Priority, which must be multiple of 4096 ranging from 0 to 61440. 

By default, it is 32768. MSTI priority is an important criterion on determining if 

the switch will be chosen as the root bridge in the specific instance. 

Global Configuration Mode 

Enable the MST Instance 1 and configure its priority as 4096: 

TL-SG2008(config)# spanning-tree mst instance 1 priority 4096 

The spanning-tree mst command is used to configure MST Instance Port. To 

return to the default configuration of the corresponding Instance Port, please 

use no spanning-tree mst command. A port can play different roles in different 

spanning tree instance. You can use this command to configure the parameters 

of the ports in different instance IDs as well as view status of the ports in the 

specified instance. 

spanning-tree mst instance instance-id {[ port-priority pri ] | [ cost cost ]}