Справочное Руководство для TP-LINK TL-SG2008

 

39

 

The log information will record the settings and operation of the switch respectively for you to 

monitor operation status and diagnose malfunction. 

The  logging buffer command is used to configure the severity level and the 

status of the configuration input to the log buffer. To disable the logging buffer 

function, please use no logging buffer command.

Local Log is the log 

information saved in the switch. It has two output channels, that is, it can be 

saved to two different positions, log buffer and log file.

The log buffer indicates 

the RAM for saving system log and the information in the log buffer can be got 

by 

 command. It will be lost when the switch is restarted.   

logging buffer level 

level —— Severity level of the log information output to each channel.

There 

are 8 severity levels marked with values 0-7. The smaller value has the higher 

priority. Only the log with the same or smaller severity level value will be output. 

By default, it is 7 indicating that all the log information will be saved in the log 

buffer. 

Global Configuration Mode 

Set the severity level as 6: 

TL-SG2008(config)# logging buffer 6