Справочное Руководство для TP-LINK TL-SG2008

 

72

 

count (-i) —— The interval to send ICMP request packets. It ranges from 100 to 

1000 milliseconds. By default, this value is 1000.   

User EXEC Mode and Privileged EXEC Mode   

To test the connectivity between the switch and the network device with the IP 

192.168.0.131, please specify the count (-l) as 512 bytes and count (-i) as 1000 

milliseconds. If there is not any response after 8 times’ Ping test, the connection 

between the switch and the network device is failed to establish: 

TL-SG2008# ping 192.168.0.131 –n 8 –l 512 

The tracert command is used to test the connectivity of the gateways during its 

journey from the source to destination of the test data. 

tracert {ip-addr} [maxHops] 

ip-addr —— The IP address of the destination device. 

maxHops —— The maximum number of the route hops the test data can pass 

though. It ranges from 1 to 30. By default, this value is 4.   

User EXEC Mode and Privileged EXEC Mode 

Test the connectivity between the switch and the network device with the IP 

192.168.0.131. If the destination device has not been found after 20 maxHops, 

the connection between the switch and the destination device is failed to 

establish: 

TL-SG2008# tracert 192.168.0.131 20