Справочное Руководство для TP-LINK TL-SG2008

 

78

 

Command in the Interface Range gigabitEthernet Mode is executed 

independently on all ports in the range. It does not affect the execution on the 

other ports at all if the command results in an error on one port.   

To enter the Interface range gigabitEthernet Configuration Mode, and configure 

ports 1/0/1-3,1/0/6-7 and 1/0/9 at the same time by adding them to one port-list: 

TL-SG2008(config)# interface range gigabitEthernet 1/0/1-3,1/0/6-7,1/0/9 

The description command is used to add a description to the Ethernet port. To 

clear the description of the corresponding port, please use no description 

command. 

description string 

string —— Content of a port description, ranging from 1 to 16 characters.     

Interface Configuration Mode (interface gigabitEthernet) 

Add a description Port #5 to port 5:   

TL-SG2008(config)# interface gigabitEthernet 1/0/5 

TL-SG2008(config-if)# description Port#5 

The shutdown command is used to disable an Ethernet port. To enable this port 

again, please use no shutdown command.