Справочник Пользователя для Edimax EW-7438RPN V2
2
mode
Power
On
Device switched on and correctly
powered
powered
Flashing
Resetting to factory defaults
Off
Device not powered, not correctly
powered, or in LED off mode
powered, or in LED off mode
WPS
On
WPS connection established
Flashing
WPS in progress (waiting for
another WPS device’s connection)
another WPS device’s connection)
Flashing
Rapidly
Rapidly
WPS error
Off
No WPS connection established or
in LED off mode
in LED off mode
LAN
On
LAN port connected
Flashing
LAN activity (transferring data)
Off
LAN port not connected
GETTING STARTED
It is recommended that you first set up this extender somewhere close to the
root wireless access point, and then move this extender to another location
for optimal Wi-Fi extension.
Section A: Setting Up the Wi-Fi Extender with the WPS Button
Note: If your root wireless access point does not have a WPS button or
if you cannot set up a WPS connection properly, please refer to Section
B: Setting Up the Wi-Fi Extender with a Computer.
if you cannot set up a WPS connection properly, please refer to Section
B: Setting Up the Wi-Fi Extender with a Computer.
1. Plug the Wi-Fi extender into a power outlet close to the root wireless
access point and switch it on. The power LED should light up in a few
seconds.
seconds.