Техническая Спецификация для Brother FAX-8360P

You can scan up to 50 messages into the fax memory, even while the machine is receiving or sending 
another fax (from the memory). You can set temporary settings for each fax you’re scanning, except 
Timer and Polling.

If you get an OUT OF MEMORY message while scanning the first page of a fax, press Stop/Exit 
to cancel the scan. If you get an OUT OF MEMORY message while scanning in a subsequent page, 
you will have the option to press Fax Start to transmit the pages scanned so far, or to press 
Stop/Exit to cancel the operation.

Insert the document face down in the ADF.

Enter the fax number.

Press Fax Start. The machine starts scanning the document and the screen displays the job 
number (#XXX) of the fax, and how much memory is available. When the machine starts 
dialling you can immediately repeat Steps 1 through 3 for the next fax.

When you are sending a fax, the machine will scan documents into memory before sending. Then, as 
soon as the phone line is free, the machine will start dialling and sending the fax. If memory becomes 
full, the machine will send the document in real time (even if REAL TIME TX is set to OFF).

Sometimes you may want to send an important document immediately, without waiting for memory 
transmission. You can set REAL TIME TX to ON.

Insert the document face down in the ADF.

Press Menu, 2, 2, 5.

To change the default setting, press 

 or 

 to select ON (or OFF) and press Set. Go to Step 

6—OR—For the next fax transmission only, press 

 or 

 to select NEXT FAX ONLY.

Press Set.

For the next fax only, press 

 or 

 to select ON (or OFF) and press Set.

Press 1 if you want to select additional settings. The display returns to the SETUP SEND 
menu—OR—Press 2 if you have finished choosing settings and go to Step 7.

If you switched ON Real Time Transmission for the next fax only, enter the fax number and 
press Fax Start.