Техническая Спецификация для Brother FAX-8360P

Broadcasting is automatically sending the same fax message to multiple fax numbers. Using the 
Broadcast key, you can include up to 32 One Touch locations, up to 200 Speed Dial locations, and 
up to 50 manually dialled numbers (maximum of 282 locations if you did not use up any locations 
for Groups, access codes or credit card numbers). However, available memory will vary with the 
types of jobs in memory and numbers of locations used for broadcasting. If you broadcast to more 
than the maximum locations available, you will not be able to setup transmissions using dual access 
and the timer.

The easiest way to broadcast is to first combine frequently used One Touch and Speed Dial numbers 
as a Group, which uses up a One Touch key or a Speed Dial #. (Remember, you can have up to six 
Groups and Quick Dial numbers can be included in more than one Group). Then by pressing 
Broadcast between each location, you can include One Touch, Speed Dial, Groups, and manual 
dialling (using the dial pad) in the same broadcast. Use Search/Speed Dial to help you choose the 
numbers easily.

After the broadcast is completed, a Broadcast Report will be printed automatically to let you know 
the results.

Insert the document face down in the ADF.

Enter a number using One Touch, Speed Dial, Search, Group number or the dial pad.
Example: Group number

Press Broadcast. You will be prompted to enter the next number.

Enter the next number.
Example: Speed Dial

Press Broadcast.

Enter the next fax number.
Example: Manual dialling, using the dial pad.

Press Fax Start.

The machine will read the documents into memory and then start sending faxes to all the numbers 
you entered.

■ To skip one of the locations in broadcasting, press Stop/Exit whilst that number 

is being dialled. To cancel all locations, press Menu, 2, 6. The locations, which 
were cancelled, are printed on the Broadcast Report.

■ Enter the long dialling sequence numbers as you normally would, but keep in 

mind that each key counts as one location, so the number of locations you can 
call becomes limited.

■ If the line is busy or a connection could not be made for some other reasons 

while broadcasting, the machine will redial the number automatically.

■ If the memory is full, press Stop/Exit to abort the job or press Fax Start to send 

the portion that is in the memory (if more than one page has been scanned).