Техническая Спецификация для Brother DR2100 DR-2100

MATERIAL SAFETY DATA SHEET        Page : 3 of 6 

According to EC-directive 2001/58/EC   

Product 

Name 

 

      Date 

of 

last 

issue: 

Nov. 

7, 

2007 

TN-2110 

/ 

TN-2120 

Toner 

     Version 

number: 

1 

 

 

 

 

 

 

 

 

     Section 6 - Accidental release measures 

Personal precautions: 

Minimize generation of toner dust.    Avoid inhalation of the dust. 

Environmental precautions:   

Prevent from entering into the surface water or sewerage system. 

Method of cleaning up:   

Sweep the spilt toner or remove it with a vacuum cleaner, and transfer into the sealed container 

carefully.    Sweep slowly to minimize generation of dust during clean-up.    If the vacuum cleaner is 

used, the motor must be rated as dust explosion-proof.    A conductive hose bonded to the machine   

should be used to reduce static build-up.    Residue can be removed with soap and cold water.     

Clothes may be washed or dry cleaned after removal of loose toner. 

See section 13 for disposal considerations. 

 

     Section 7 - Handling and storage  

Handling: 

Keep out of the reach of children.    In case of accidental spill, try not to disperse the particles.    Avoid 

prolonged inhalation of excessive dust and contact eyes.  Use with adequate ventilation.  Use the 

mask that is recommended for the prevention of dust and coarse particulate. 

Storage: 

Keep out of the reach of children.  Keep container tightly closed.  Keep away from contact with 

oxidizing materials.    Store in a cool and dry place away from direct light to maintain quality. 

 

     Section 8 - Exposure controls / personal protection 

Exposure limit value: 

 

 

Workplace exposure limit (UK, basis: EH40/2005 ) 

Ingredients CAS 

 

Number 

Long-term exposure limit   

(8-hour TWA reference period) 

Short-term exposure limit   

(15-minute TWA reference period) 

Carbon black 

1333-86-4 

3.5 mg.m

-3

7 mg.m

-3

Silicon Dioxide 

(amorphous) 

7631-86-9 6 

mg.m

-3

     

 (inhalable dust) 

2.4 mg.m

-3

 

 (respirable dust) 

-- 

 

Ventilation: 

Good general ventilation should be sufficient under normal use. 

Personal protective equipment: 

Not required under intended use.    For use other than in normal operating procedures (such as in   

the event of large spill), the following should be applied: 

Eye/face:  

Safety goggles 

Skin: 

Protective gloves recommended 

Respiratory: D

ust mask    (Respirator for large spill)