Техническая Спецификация для Intellinet INT 16PORT RACKMOUNT KVM SWITCH USB+PS/2 506496

2

 

2

ENGLISH

Thank you for purchasing the INTELLINET NETWORK SOLUTIONS

™

 8-Port Rackmount KVM Switch, Model 506441 or 16-Port Rackmount 

KVM Switch, Model 506496. For a full list of specifications, refer to the datasheets available at www.intellinet-network.com.
The USB and the PS/2 interface standard on both console side and PC side makes this switch especially useful in an environment with 

mixed equipment; e.g., older computers with PS/2 connections and newer models featuring USB ports. With the ability to manage and 

control multiple PS/2 or USB computers from a single console, you’ll also be able to enjoy these convenient features:

•  Rackmount KVM Switch: 8-Port, Model 506441 or 16-Port, Model 506496

•  19” rackmount brackets

•  4-in-1 connection cables: 8 with Model 506441 or 16 with Model 506496 

•  User manual

To install the Rackmount KVM Switch in a standard 19” rack unit, simply screw the two 

mounting brackets to the sides of the switch (screws and brackets included). NOTE: Two sets

of pre-drilled holes let you connect the brackets so either the front panel or the rear panel of

the switch is facing out. Then attach the two brackets to the rack.

Before making any power or network connections to the Rackmount KVM Switch, make sure that all devices in the configuration are 

turned off and properly grounded.

1. Connect the USB or PS/2 keyboard and mouse and the monitor of your command (console) computer to the corresponding plugs in   

   the console section of the switch’s rear panel (highlighted at 

   right).

2. Plug the HD15 connector on one of the included 4-in-1  

   connection cables into any of the PC ports to the right of the  

   console section on the rear panel of the switch, then plug the  

   keyboard/mouse and monitor connectors on the other end of the 

   connection cable into a computer to be included in the  

   configuration. Repeat this step for as many computers as you  

   desire and the switch allows (8 or 16 total). NOTE: The shape of these HD15 connectors has been modified so that only KVM cables  

   designed to work specifically with this series of switches can be properly plugged in. Do not try to use ordinary 15-pin VGA connector 

   cables in your configuration.

3. Plug the included power adapter into the DC9V jack, then connect it to an AC power outlet and turn on the computers.

The port LEDs (1-3 are shown at right for reference) indicate the status of the ports as determined by using either the corresponding 

buttons on the switch — below the LEDs — or the On-Screen 

Display (OSD).

•  The On Line LEDs light red to indicate that the computer 

   connected to the corresponding port is powered on.

•  The Selected LEDs light green to indicate that the computer 

   connected to the corresponding port is the one currently 

   selected and controlled by the console.

•  The Port Selection buttons can be pressed to select and control the computer connected to the corresponding port. 

•  The recessed Reset button can be pressed (using a pin or similar pointed object) to reset the switch if it isn’t responding.

The Rackmount KVM Switch supports hot Plug and Play: Computers can be removed from the configuration and added back into it 

simply by disconnecting then re-connecting their cables from their PC ports — without the need to turn off the switch. The computer, 

however, must be re-connected to the same port as before for this feature to work properly. NOTE: The console section doesn’t support 

hot-plugging of a PS/2 keyboard or mouse.

•  Pop-up on-screen display (OSD) menu

•  Computer selection and operation using 

   front-panel push buttons and OSD menu

•  Hot Plug and Play: no need to shut down 

   the KVM switch to attach or remove PCs

•  Numerical display and LED indicators for  

   easy bank/port status monitoring

•  Screen resolution support up to 1600 x 900

•  Support of Microsoft and Logitech standard

   5-key mice and compatible models

•  Auto-Scan period programmable via OSD 

   menu option

•  Password protection

•  Auto-logout timeout support