Техническая Спецификация для Sony BDV-N5200W BDVN5200WB
Модели
BDVN5200WB
69
GB
BDV-N9200W/BDV-N9200WL/BDV-N7200W/BDV-N7200WL/BDV-N5200W
4-485-800-13(1)
D:\NORM'S JOB\SONY HA\SO140001\BDV-N9200_7200_5200_E3200
(PMRF 02)\4485800131_GB (CEK)\100ADD.fm
(PMRF 02)\4485800131_GB (CEK)\100ADD.fm
masterpage:
Right
A
d
di
tio
n
al
Inf
o
rm
at
io
at
io
n
There is no sound.
t The speaker cords are not
t The speaker cords are not
connected securely.
t Check the speaker settings
The Super Audio CD sound of an
equipment that is connected to the
HDMI (IN 1) or HDMI (IN 2) jack is not
output.
t HDMI (IN 1) and HDMI (IN 2) does not
equipment that is connected to the
HDMI (IN 1) or HDMI (IN 2) jack is not
output.
t HDMI (IN 1) and HDMI (IN 2) does not
accept an audio format that
contains copy protection. Connect
the analog audio output of the
equipment to the AUDIO IN (L/R)
jacks of the main unit.
contains copy protection. Connect
the analog audio output of the
equipment to the AUDIO IN (L/R)
jacks of the main unit.
There is no sound from the TV via the
HDMI (OUT) jack when using the Audio
Return Channel function.
t Set [Control for HDMI] in [HDMI
HDMI (OUT) jack when using the Audio
Return Channel function.
t Set [Control for HDMI] in [HDMI
Settings] of [System Settings] to
[On] (page 60). Also, set [Audio
Return Channel] in [HDMI Settings]
of [System Settings] to [Auto]
(page 61).
[On] (page 60). Also, set [Audio
Return Channel] in [HDMI Settings]
of [System Settings] to [Auto]
(page 61).
t Make sure that your TV is
compatible with the Audio Return
Channel function.
Channel function.
t Make sure that an HDMI cable is
connected to a jack on your TV that
is compatible with the Audio Return
Channel function.
is compatible with the Audio Return
Channel function.
The system does not output sound of
TV programs correctly when connected
to a set-top box.
t Set [Audio Return Channel] in [HDMI
TV programs correctly when connected
to a set-top box.
t Set [Audio Return Channel] in [HDMI
Settings] of [System Settings] to
[Off] (page 61).
[Off] (page 61).
t Check the connections (page 23).
Severe hum or noise is heard.
t Move your audio equipment away
t Move your audio equipment away
from the TV.
t Clean the disc.
The sound loses stereo effect when
you play a CD.
t Select stereo sound by pressing
you play a CD.
t Select stereo sound by pressing
The sound outputs from the center
speaker only.
t Depending on the disc, the sound
speaker only.
t Depending on the disc, the sound
may output from the center speaker
only.
only.
No sound or only a very low-level
sound is heard from the surround
speakers.
t Check the speaker connections and
sound is heard from the surround
speakers.
t Check the speaker connections and
settings (pages 21, 47).
t Check the sound field setting
t Depending on the source, the effect
of the surround speakers may be
less noticeable.
less noticeable.
t Set [Sound Field] to [ClearAudio+]
Distortion occurs in the sound of a
connected equipment.
t Reduce the input level for the
connected equipment.
t Reduce the input level for the
A sudden loud music is heard.
t The built-in or USB sound
t The built-in or USB sound
demonstration is activated. Press
2
– to reduce the volume or press
x
to stop the demonstration.
Sound