Техническая Спецификация для Epson EB-S03 V11H556140
Модели
V11H556140
Submenu
Function
Trap IP Address
1/Trap IP Ad‐
dress 2
1/Trap IP Ad‐
dress 2
You can register up to two IP addresses for the SNMP trap
notification destination. You can enter a number from 0 to 255 in
each field of the address. However, the following IP addresses
cannot be used. 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x
is a number from 0 to 255)
notification destination. You can enter a number from 0 to 255 in
each field of the address. However, the following IP addresses
cannot be used. 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x
is a number from 0 to 255)
Bonjour
Set this to On when connecting to the network using Bonjour.
See Apple's Web site for more information on the Bonjour
service.
See Apple's Web site for more information on the Bonjour
service.
s
Message Broad‐
casting
casting
You can switch the EPSON Message Broadcasting function to
enable or disable.
enable or disable.
Reset menu
Resets all of the network settings.
Submenu
Function
Reset network
settings.
settings.
To reset all of the Network settings, select Yes.
ECO Menu
When you make ECO menu settings, the projector performs functions to
save power. When power saving settings have been enabled, a leaf icon is
displayed next to each submenu.
save power. When power saving settings have been enabled, a leaf icon is
displayed next to each submenu.
Submenu
Function
Power Consump‐
tion
tion
You can set the lamp brightness to one of two settings. Select
ECO
ECO
if the images being projected are too bright, such as when
projecting images in a dark room or onto a small screen. When
ECO
ECO
is selected, power consumption during projection
decreases, and fan rotation noise is reduced.
When using at high altitude or in locations subject to high
temperatures, you may not be able to change settings.
When using at high altitude or in locations subject to high
temperatures, you may not be able to change settings.
Light Optimizer
(This item can only be set when Power Consumption is set to
Normal
Normal
.)
When set to On, the lamp brightness is adjusted according to the
image being projected. This helps to reduce the amount of
electricity being used by lowering the lamp's brightness
according to the scene being projected.
The setting is stored for each Color Mode.
image being projected. This helps to reduce the amount of
electricity being used by lowering the lamp's brightness
according to the scene being projected.
The setting is stored for each Color Mode.
List of Functions
86