Техническая Спецификация для Funai WD6D-M100 WD6DM100

47

EN

You can resume playback from the point where you stopped it 
before.

During playback, press [STOP C].

The resume message will appear.

Press [PLAY B].

In a few seconds, playback will resume from the point at 
which you stopped it before. Even if you turn off the unit, 
you can resume playback at the same point after turning 
back on the unit.

To cancel the resume playback and start playing back the 
disc from the beginning:
Press [STOP C] while playback is stopped.

• For MP3 and JPEG files, playback will resume from the 

beginning of the track at which playback was stopped.

During playback, press [FWD D] or [REV E].

Each time you press [FWD D] or [REV E], the 
approximate speed will change as follows.
Fast forward or fast reverse playback across titles (for 
DVDs) or tracks / files (for MP3 / DivX

®

) is not possible.

• For audio CDs and MP3 files approximate speed is fixed 

at 8x with sound.

• For  DivX

®

 files, approximate forward speeds are 2x, 20x 

and 40x, and approximate reverse speeds are 5x, 20x 
and 40x.

• To return to playback at normal speed, press [PLAY B].
• Picture quality of DivX

®

 files in fast reverse is lower than 

that in fast forward.

• For  some  DivX

®

 files, Fast forward/Fast reverse may not 

function.

• Forward / reverse speeds are indicated with icons as follows.

Forward (Approx. Speed):
2x:   
20x: 
40x: 
Reverse (Approx. Speed):
5x:   
20x: 
40x: 

To enjoy recorded programmes without any interruptions, 
press [CM SKIP]. 

Normal playback will start 30-second advanced point from 
the point at which you press [CM SKIP].
Each time you press [CM SKIP], the start point will move 
another 30 seconds forward and playback resume 
automatically.
You can press [CM SKIP] up to 6 times (180 seconds).

During playback, press [PAUSE F].

Playback will pause with the sound muted.

Press [PLAY B] to resume playback.

Available only on discs recorded in the Dolby Digital format, 
Rapid Playback plays back in a slightly faster/slower speed 
while keeping the sound output.

\0.8x PLAY].

Press [PLAY B] to return to the normal 
playback.

• Audio (language) setting cannot be changed while using this 

mode.

• This feature may not work at some point in a disc.
• Audio is PCM during Rapid Playback mode.
• When you select “PAL” in “TV System” (see page 66), this 

function is not available with discs recorded using the NTSC 
system.

B

: Press [1.3x

\0.8x PLAY] once during playback.

Plays back approximately at 0.8 times of normal 
playback.

B

: Press [1.3x

\0.8x PLAY] twice during playback.

Plays back approximately at 1.3 times of normal 
playback.

B

:Press [1.3x

\0.8x PLAY] thrice to play back in 

normal speed.
No effects.

x0.8

x1.3

E9TF0ED_EN.book  Page 47  Wednesday, March 17, 2010  1:32 PM