Manualsbrain.com
  1. Инструкции и руководства
  2. Бренды
  3. Transition Networks
  4. Media Converter 10/100/1000BTX to 1000BFX
  5. Справочник Пользователя

Справочник Пользователя для Transition Networks Media Converter 10/100/1000BTX to 1000BFX SPOEB1011-100

Модели
SPOEB1011-100
Скачать
Страница из 3
s t a n d - a l o n e
m e d i a   c o n v e r t e r
Transition Networks, Inc.
6475 City West Parkway
Minneapolis, MN  55344 USA
tel 952.941.7600 
or 800.526.9267
fax 952.941.2322
info@transition.com
http://www.transition.com
©2007 Transition Networks, Inc.
All trademarks are the property of their respective owners.
Technical information is subject to change without notice.
SPOEB10xx-100
Specifications
Standards
IEEE Std. 802.3™, IEEE Std. 802.3af
Switches
SW1: Auto-Negotiation On/Off
SW2: Speed TP: Force 10Mbps or
100Mbps (SW1 off)
SW3: Duplex TP: Force Half or Full
Duplex (SW1 off)
SW4: Duplex Fiber: Half or Full Duplex
SW5: AutoCross™ On/Off
SW6: PSE On/Off
SW7: PSE/LPT on/off
SW8: Unused
Fiber Optic Connector Specs
Dimensions
Width: 3.25" [82 mm]
Depth: 4.8" [120 mm]
Height: 1.0" [25 mm]
Power
90 – 250VAC external power supply
Power Consumption
20W max.
Operating Temperature
0 – 40°C [32° – 104°F]
Storage Temperature
-25° to +85°C [-13° to +185°F]
Environment
5% – 95% humidity non-condensing;
0 – 10,000 ft. altitude
Shipping Weight
2 lbs. [0.90 kg]
Compliance
EN55022:1994+A1:1996+A2:1997
Class A; FCC Part 15 Subpart B; 
UL 1950
Warranty
Lifetime
Ordering Info
SPOEB1011-100
10/100BASE-TX (RJ-45) 
[100 m/328 ft.]
to 100BASE-FX 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SPOEB1013-100
10/100BASE-TX (RJ-45) 
[100 m/328 ft.]
to 100BASE-FX 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SPOEB1014-100
10/100BASE-TX (RJ-45) 
[100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
SPOEB1015-100
10/100BASE-TX (RJ-45) 
[100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
SPOEB1016-100
10/100BASE-TX (RJ-45) 
[100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[60 km/37.3 mi.] Link Budget: 29.0 dB
SPOEB1017-100
10/100BASE-TX (RJ-45) 
[100 m/328 ft.]
to 100BASE-FX 1550nm SM (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
SPOEB1035-100
10/100BASE-TX (RJ-45) 
[100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[120 km/74.6 mi.] LB: 36.0 dB
Single Fiber Products 
Recommended use in pairs (see page 17)
SPOEB1029-100
10/100BASE-TX (RJ-45) 
[100 m/328 ft.]
to 100BASE-FX 1310nm TX / 1550nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] LB: 19.0 dB
SPOEB1029-101
10/100BASE-TX (RJ-45) 
[100 m/328 ft.]
to 100BASE-FX 1550nm TX / 1310nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] LB: 19.0 dB
Power over Cat5 to Remotely Located Devices
Enables enterprises to provide power to
network devices over the existing CAT5
data connection.
Transition's AC powered PoE media
converters combine data received over
a fiber optic link with -48VDC power;
providing power to Data Terminal
Equipment (DTE) Power Devices (PD)
over unshielded twisted pair cable. The
PoE converters are Power Sourcing
Equipment (PSE) and are fully
compatible with Powered Devices (PD)
that comply with the IEEE802.3af™:
2003 standard. The converters also
include a PD signature sensing and power monitoring
features per the IEEE 802.3af standard. Other features
include Over-Current Protection, Under-Current Detection
and Fault Protection Input.
This feature enhanced model offers the ability to
enable/disable many of the features as well as force port
capabilities (see switch section under specifications to the
right).
In addition, with the PSE/LPT switch enabled, a loss of
Fiber RX will disable PSE power output on the UTP port for
2 seconds to allow remote device to re-initialize.
The PoE converter is fully compatible with devices that
comply with the IEEE802.3af standard. The PoE converter
is capable of inserting power on data pairs of the MDI.
Features
(see next pages)
(see next pages)
(see next pages)
(see next pages)
(see next pages)
Power Over Ethernet 
10/100BASE-TX to 100BASE-FX
Power over Ethernet PSE Media Converter

Auto-Negotiation

AutoCross™

Link Pass Through

Far End Fault (FEF)

Automatic Link Restoration

Powered Device Reset

External AC power supply

IEEE802.3af Power Over Ethernet Compatible

48 VDC PSE Output Voltage

Signal Pair Power Insertion

PD Detection Signature

Over-Current Protection & Under-Current Detection

Minimum Load Sensing

Fault Protection Input

Switch selectable features and port settings
NEW
Min TX Max TX
RX
Max In
Link
PWR PWR
Sens
PWR
Budget
SKU
(dBm)
(dBm) (dBm)
(dBm)
(dB)
SPOEB1011-100
-19.0
-14.0
-30.0
-14.0
11.0
SPOEB1013-100
-19.0
-14.0
-30.0
-14.0
11.0
SPOEB1014-100
-15.0
-8.0
-31.0
-8.0
16.0
SPOEB1015-100
-8.0
-2.0
-34.0
-7.0
26.0
SPOEB1016-100
-5.0
0.0
-34.0
-7.0
29.0
SPOEB1017-100
-5.0
0.0
-34.0
-7.0
29.0
SPOEB1029-100
-13.0
-6.0
-32.0
-3.0
19.0
SPOEB1029-101
-13.0
-6.0
-32.0
-3.0
19.0
SPOEB1035-100
0.0
+5.0
-36.0
-3.0
36.0
Optional Accessories
(sold separately)
Mounting Options:
WMBD 
(see page 66)
DIN Rail Mount Bracket 5.0" [127 mm]
WMBL 
(see page 66)
Wall Mount Bracket 4.0” [102 mm]