Справочник Пользователя для Graupner Hendheld RC 2.4 GHz No. of channels: 5 33110

103

 

The continued development of model helicopters and 
helicopter components, such as gyros, speed governors, 
rotor blades etc., has led to the current position where 
helicopters are capable of sophisticated 3-D aerobatics. 

Model helicopters can be operated with the 

mx-10 

HoTT only with stabilizer-free systems „fl ybarless“, for 
example V-Stabi or Microbeast be operated. This system 
mixes it all for the swashplate and tail rotor necessary 
servos.
The motor is controlled by switching channel 5.
For the connection of the servos for your fl ybarless 
system refer to the related manual. 
If the telemetry function of the receiver is used, the 
motor control must be switched to channel 6 using the 
optional Smart Box (see page 117 channel mapping) in 
order to connect the telemetry sensors on channel 5.

The servos will be connected to the receiver outputs 
in the order shown on this page:
Outputs not required are simply left vacant.
Please note the additional information of your 
fl ybarless system.

Tail rotor servo (Gyro system)

Roll servo

Pitch servo

Telemetry sensor or throttle

free or throttle (Channel Mapping 
with optional Smart-Box)

Pitch- or Roll-2 
servo

All menus which are relevant to model helicopters are 
marked with a “helicopter” symbol in the “Program 
descriptions”:

This means that you can easily skip irrelevant menus 
when programming a model helicopter.

Channel 5   Motor