Техническая Спецификация для Futaba Hendheld RC 2.4 GHz No. of channels: 14 1-F8075

  Move the cursor to the [MODE] item and 

touch the RTN button to switch to the data 

input mode. Select the master or single 

mode by scrolling the touch sensor. 

*The display blinks.

  [MASTER]: Master mode
  [SINGLE]: Single mode
  Touch the RTN button to select the mode 

and return to the cursor mode.

  When setting a master switch, move the 

cursor to the [MASTER-SW] item and touch 

the RTN button to access the selection 

screen. Select the switch and set its ON 

direction.

*For a description of the switch selection method, see the 

description at the back of this manual.

  When setting a safety switch, move the 

cursor to the [SAFETY-SW] item and touch the 

RTN button to access the selection screen. 

Select the switch and set its ON direction.

  Move the cursor to the direction switch item 

and touch the RTN button to access the 

selection screen. Select the switch and set its 

ON direction.

*For a description of the switch selection method, see the 

description at the back of this manual.

  Move the cursor to the aileron, elevator or 

rudder item for each direction and touch the 

RTN button to switch to the data input mode. 

Adjust the rate independently by scrolling 

the touch sensor. 

  Initial value: (Dependent upon the snap roll 

direction)

  Adjustment range: -150~+150%

*When the RTN button is touched for one second, the rate is 

reset to the initial value.)

  Touch the RTN button to end the adjustment 

and return to the cursor mode.