Техническая Спецификация для Futaba Hendheld RC 2.4 GHz No. of channels: 14 1-F8075

Модели

1-F8075

<Functions of Linkage Menu>

● Select the function name

and return to the Linkage

menu by touching the

R T N b u t t o n . 　 O r t h e

H O M E / E X I T b u t t o n i s

pushed.

<SensorTouch™>

RETURN

SERVO MONITOR

Servo Test & Graph Display / Displays servo positions.

This is used for testing servo movement.

“Moving Test” (repetition mode) and “Neutral

Test” (fixed position mode) are available.

The “Neutral Test” is good for finding the

neutral position of a servo horn.

In order to prevent any potential difficulties,

the servo test function will be inoperable, or

inaccessible, under certain conditions. Specifically,

the Servo Test function is not operational if the

Throttle Cut is ON in either airplane or helicopter

modes; or if the Throttle Hold is ON in Helicopter

mode.

● Select [SERVO] in the Linkage menu and access

the setup screen shown below by touching the

RTN button.

● A [U.MENU/MON.] button is pushed once from a

home screen.

Servo test operation

1. Move the cursor to the [OFF] item and touch

the RTN button to switch to the data input

mode.

Select the test mode by scrolling the touch

sensor and touch the RTN button. The display

blinks. Touch the RTN button to change the

mode. (To terminate mode change, touch

the S1 button.)

[MOVING]: Mode which repeats operation of

each servo

[NEUTRAL]: Mode which locks each servo in

the neutral position

2. Move the cursor to the [MOVING] or

[NEUTRAL] item and touch the RTN button to

switch to the data input mode.

Select the [OFF] by scrolling the touch sensor

and touch the RTN button. Testing is stopped.

Scrolling

● Moving cursor

● Selecting mode