Справочник Пользователя для Reely Hendheld RC 2.4 GHz No. of channels: 6 1310037

In order to be able to discern between model memories more easily it makes sense to give the memories the name of 

the corresponding models. The name can consist of a combination of up to 8 letters, numbers or characters. 

 

You can always change only the name of the model memory that is active at the moment. If you want to 

change the name of another model memory, you need to call and activate the desired model memory first.

Setting the model name:
•  Switch on the transmitter and call the system setting menu.
•  Move the cursor arrow to the menu item „Model name“ with

the two buttons „UP“ and „DOWN“.

•  Briefly push the button „OK“ to activate the menu item.
  The display shows the currently set model memory with the 

model name. The first letter in the name is already backlit back

and can be set.

•  Push the buttons „UP“ or „DOWN“ to select the desired letter

now. The arrow pointing to the right at the lower display edge 

indicates that the remaining letters and special characters are 

available on a second display page.

•  To switch to the second letter, briefly push the button „OK“.

The second letter then gets a black background. If you push 

the button „OK“ and hold it, the model name set ex works is 

called.

  The second letter is set according to the same pattern as the 

first one.

•  Repeat the above procedure until the desired model name has

been programmed.

•  Keep the button „CANCEL“ pushed for a longer period to save

the set model name. The display then shows the system setup 

menu again.

•  Push the button „CANCEL“ repeatedly until you return to the

operating display and check if the desired model name is set 

correctly.