Справочник Пользователя для Reely Hendheld RC 2.4 GHz No. of channels: 6 1310037

  This menu is only available if a helicopter with variable pitch function or swash 90°, 120° or 140° was 

selected in the system settings menu!

Just like the throttle curve, the pitch curve can be individually set in all five points. It is no matter whether you are using

a model with only one pitch servo or the swash plate is controlled by three servos at once.
Setting the pitch curve:
•  Switch on the transmitter and call the function setting menu.
•  Move the cursor arrow to the menu item „Pitch Curve“ with the

two buttons „UP“ and „DOWN“.

•  Briefly push the button „OK“ to activate the menu item.
  The display shows the indications for the percentage setting 

values for the five points of the pitch curve (L, 1, 2, 3 and H),

the control curve chart and the flight condition „Normal“ (the

switch „SWB“ has to be in the front position for this).

  The vertical dash in the chart marks the position of the pitch 

control stick. 

 In  flight  condition  „Normal“,  the  values  of  the  pitch  curve

should be reduced a little to keep the curve flatter. The model

helicopter will thus be controllable more easily and delicately 

in hover flight this way.

•  Pushing the buttons „UP“ or „DOWN“ selects the percentage

input value for the bottom point of the pitch curve in the flight

condition „normal“. If the button „OK“ is pushed and held, the 

factory parameters are called.

•  When briefly pushing the button „OK“, the cursor arrow will

jump to the pitch curve setting point „1“. Push the buttons „UP“ 

or „DOWN“ to set the percentage input value for this point.

•  Repeat this process until you have set the desired value for

the flight condition „Normal“ in all five points.

•  Now operate the toggle switch „SWB“ to call the flight condi-

tion „Idle up“.