Техническая Спецификация для Tracopower TXL 035-05S 35W Enclosed Power Supply 5Vdc 7A TXL 035-05S
Модели
TXL 035-05S
http://www.tracopower.com
Page 4 of 10
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
General Specifications
Temperature ranges
– Operating
–10°C to +70°C
– Load derating above 45°C
2 %/°K (2.5 %/°K for TXL 120/220/1000)
– Storage (non operating)
–10°C to +75°C
Temperature coefficient
0.02 %/°C
Efficiency
70–84 % (depending on model)
Humidity (non condensing)
85 % rel max. (non condensing)
Switching frequency
50 kHz typ. (pulse width modulation)
Hold-up time
20 ms min.
Isolation voltage (60sec)
– Input/Output
3‘000 VAC
– Input/Case
1‘500 VAC
– Output/Case
500 VAC
– Output/Output
60-100 Watt multiple output models: 500 VAC (for all outputs of triple output models!)
35 Watt dual output models: outputs not isolated
Reliability /calculated MTBF (MIL-HDBK-217F @ 25°C typ., ground benign)
>250’000 h
Electromagnetic compatibility – Conducted input RI suppression
EN 55022, class B, FCC part 15, level B
(EMC), Emissions
– Harmonic current emissions
IEC/EN 61000-3-2, class D (TXL 120/150/220)
IEC/EN 61000-3-2, class A (others)
– Flicker
IEC/EN 61000-3-3
Electromagnetic compatibility – Electrostatic discharge ESD
IEC/EN 61000-4-2 4 kV / 8 kV
(EMC), Immunity
– RF field immunity
IEC/EN 61000-4-3 3 V/m
– Electrical fast transients/burst immunity
IEC/EN 61000-4-4 1 kV
– Surge
IEC/EN 61000-4-5 1 kV / 2 kV
– Conducted RF
IEC/EN 61000-4-6 3 V/m
– Magnetic field
IEC/EN 61000-4-8 3 A/m
– Voltage dip
IEC/EN 61000-4-11
Safety standards
UL 60950-1, IEC 60950-1, EN 60950-1
Safety approval
cUL/UL File E188913
Casing material
TXL 025/035 nickel plated steel (chassis & cover)
TXL 50/60/70/100 aluminium (chassis), nickel plated steel (cover)
others aluminium (chassis & cover)
Enclosed Power Supplies
TXL Series
15–1000 Watt