Справочник Пользователя для TP-LINK TL-SG2008

 

99 

Strict-Priority + Weight Round Robin Mode. In this mode, this 
switch provides two scheduling groups, SP group and WRR 
group. Queues in SP group and WRR group are scheduled 
strictly based on strict-priority mode while the queues inside 
WRR group follow the WRR mode. In SP+WRR mode, TC3 is in 
the SP group; TC0, TC1 and TC2 belong to the WRR group and 
the weight value ratio of TC0, TC1 and TC2 is 1:2:4. In this way, 
when scheduling queues, the switch allows TC3 to occupy the 
whole bandwidth following the SP mode and the TC0, TC1 and 
TC2 in the WRR group will take up the bandwidth according to 
their ratio 1:2:4. 

Equal-Mode. In this mode, all the queues occupy the bandwidth 
equally. The weight value ratio of all the queues is 1:1:1:1. 

Bandwidth function, allowing you to control the traffic rate and broadcast flow on each port to 
ensure network in working order, can be implemented on Rate Limit and Storm Control pages. 

Rate limit functions to control the ingress/egress traffic rate on each port via configuring the 
available bandwidth of each port. In this way, the network bandwidth can be reasonably distributed 
and utilized.   

Choose the menu QoS→Bandwidth Control→Rate Limit to load the following page. 

 

Figure 9-10 Rate Limit 

The following entries are displayed on this screen: 

¾

  Rate Limit Config 

Click the Select button to quick-select the corresponding port 
based on the port number you entered.