Справочник Пользователя для TP-LINK TL-SG2008

 

6 

The following parts are located on the front panel of the switch: 

¾

  Reset: Press this button for five seconds or above to reset the software setting back to factory 

default setting. 

¾

  LEDs 

On(Green) 

The switch is powered on. 

Power 

Flashing/Off 

The switch is powered off or power supply is abnormal. 

Flashing 

The switch is working normally. 

System 

On/Off 

The switch is working abnormally. 

On 

A 1000Mbps device is connected to the corresponding port, but 
no activity. 

Green 

Flashing  Data is being transmitted or received. 

On 

A 10/100Mbps device is connected to the corresponding port, but 
no activity. 

Link/Act 

Yellow 

Flashing  Data is being transmitted or received. 

The rear panel of TL-SG2008 features a power socket and eight ports. Its rear panel is shown as 

the following figure. 

 

Figure 2-2 Rear Panel of TL-SG2008 

¾

  1000Mbps Ports: Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or 

1000Mbps. Each has a corresponding LED on the front panel. 

¾

  Power Socket: Connect the female connector of the power cord here, and the male connector 

to the DC power outlet. Please make sure the voltage of the power supply meets the 

requirement of the input voltage (12V/1A for TL-SG2008).