Справочник Пользователя для TP-LINK TL-SG2008

 

13 

Select a predefined DST configuration. 

z

 

USA: Second Sunday in March, 02:00 ~ First Sunday in 
November, 02:00. 

z

 

Australia: First Sunday in October, 02:00 ~ First Sunday in 
April, 03:00. 

z

 

Europe: Last Sunday in March, 01:00 ~ Last Sunday in 
October, 01:00. 

z

 

New Zealand: Last Sunday in September, 02:00 ~ First 
Sunday in April, 03:00. 

Specify the DST configuration in recurring mode. This 
configuration is recurring in use. 

z

 

Offset: Specify the time adding in minutes when Daylight 
Saving Time comes. 

z

 

Start/End Time: Select starting time and ending time of 
Daylight Saving Time. 

Specify the DST configuration in Date mode. This configuration is 
recurring in use. 

z

 

Offset: Specify the time adding in minutes when Daylight 
Saving Time comes. 

z

 

Start/End Time: Select starting time and ending time of 
Daylight Saving Time. 

1.  When the DST is disabled, the predefined mode, recurring mode and date mode cannot be 

configured. 

2.  When the DST is enabled, the default daylight saving time is of Europe in predefined mode. 

Each device in the network possesses a unique IP Address. You can log on to the Web 
management page to operate the switch using this IP Address. The switch supports three modes 
to obtain an IP address: Static IP, DHCP and BOOTP. The IP address obtained using a new mode 
will replace the original IP address. On this page you can configure the system IP of the switch. 

Choose the menu System→System Info→System IP to load the following page. 

 

Figure 4-7 System IP 

The following entries are displayed on this screen: