Справочник Пользователя для TP-LINK TL-SG2008
88
port. If the port can be added to the multicast group, it will be added to the multicast address table;
if the port can not be added to the multicast group, the switch will drop the IGMP report message.
In that way, the multicast streams will not be transmitted to this port, which allows you to control
hosts joining the multicast group.
if the port can not be added to the multicast group, the switch will drop the IGMP report message.
In that way, the multicast streams will not be transmitted to this port, which allows you to control
hosts joining the multicast group.
8.3.1 IP-Range
On this page you can figure the desired IP-ranges to be filtered.
Choose the menu Multicast→Multicast Filter→IP-Range to load the following page.
Figure 8-10 Multicast Filter
The following entries are displayed on this screen:
¾
Create IP-Range
IP Range ID:
Enter the IP-range ID.
Start Multicast IP:
Enter start multicast IP of the IP-range you set.
End Multicast IP:
Enter end multicast IP of the IP-range you set.
¾
IP-Range Table
IP-Range ID Select:
Click the Select button to quick-select the corresponding
IP-range ID based on the ID number you entered.
IP-range ID based on the ID number you entered.
Select:
Select the desired entry to delete or modify the corresponding
IP-range. It is multi-optional.
IP-range. It is multi-optional.
IP-Range ID:
Displays IP-range ID.
Start Multicast IP:
Displays start multicast IP of the IP-range.
End Multicast IP:
Displays end multicast IP of the IP-range.
8.3.2 Port Filter
On this page you can configure the multicast filter rules for port. Take the configuration on this
page and the configuration on IP-Range page together to function to implement multicast filter
function on the switch.
page and the configuration on IP-Range page together to function to implement multicast filter
function on the switch.