Техническая Спецификация для TP-LINK 54Mbps Pocked-Sized Wirerless Print Server TL-WPS510U
Модели
TL-WPS510U
17
4) Select
Custom, and click Settings.
5) Choose
LPR, and input the queue name as lp1.
6) Click
OK -> Next -> Finish, to complete the wizard.
7) Click
Close -> Apply.
8) Now, the print server port has been created.
4.4 Using PSAdmin
After the software of setup CD is successfully installed, starts PSAdmin utility from your Windows Start
menu: start -> All Programs -> Network Print Server -> PSAdmin. The screen will then appear as
follow picture.
menu: start -> All Programs -> Network Print Server -> PSAdmin. The screen will then appear as
follow picture.
All print server(s) on the WLAN will be displayed along with their respective device name, MAC Address,
print server name, firmware version, and status. The terms are defined as follows:
print server name, firmware version, and status. The terms are defined as follows:
¾
Device Name: The name of the print server hardware used for identification purposes.
¾
MAC Address: The Ethernet address of the print server.
¾
Version: The firmware version of the print server.
¾
Status: Connected printer’s status presently.
4.5 Wizard
Wizard is a configuration program that can assist you in setting up the necessary parameters for your print
server device to function. Setup a print server by using Wizard.
server device to function. Setup a print server by using Wizard.
TCP/IP Wizard