Техническая Спецификация для Superrollo Professional TA50 Garage Door Motor 50kg SR40050
Модели
SR40050
45
EN
Take measurements
Measure up and mark the centre of the door.
Mark the centre of the door, as shown, on the upper
Mark the centre of the door, as shown, on the upper
edge of the door, on the door lintel and on the garage
ceiling.
Determine the distance between the top edge
of the door and the ceiling.
Close the door slowly and measure the distance between
Close the door slowly and measure the distance between
the top edge of the door and the ceiling.
NOTE
NOTE
The minimum distance should be 6 cm.
Installation advice for fitting to sectional
doors.
If the garage door operator is used for a sectional door,
If the garage door operator is used for a sectional door,
then the guide roller of the upper door segment must be
in the bend of the guide rail when the door is closed.
1.
2.
sectional
door
min. 6 cm
up-and-down
door
min. 6 cm
3.
✗
Right
Wrong